Schedule your service
Need parts?
Used equipment
Customer portal
Need assistance?
At Teknoxgroup, we offer many cutting-edge options available on the shelf that, with their precise design and high quality, meet the toughest application needs and increase the efficiency and productivity of the machine.
Edge selection is critical for enhancing production and keeping cost to a minimum. Application affects the cutting edge shape, metallurgy and style. Impact, penetration and abrasion define your application environment. An edge has to penetrate the material and not break during operation. Edge life then becomes a matter of metallurgy and thickness.
PARTNER WITH TEKNOXGROUP AND WITH CATERPILLAR EQUIPMENT EDGE OUT THE COMPETITION.
Caterpillar offers a wide range of cutting edges for motor graders. Each provides certain benefits when used in the appropriate application. Using the right edge is critical for enhancing production and keeping total costs to a minimum. The three factors to consider in choosing a cutting edge are shape, width and thickness.
There are two basic edge shapes—flat and curved—with serrated edges available in both configurations. In addition, the Cat GraderBits system dramatically expands the range of edge shape options. Cat offers two types of grader edges and three edge thicknesses for the 16M and 24M motor graders.
Cat DH-2 through-hardened steel edges are available in a variety of shapes and thicknesses to fit every application.
Maximize your edge life with tungsten carbide edges.
Cutting bit systems.
Most Cat edges are through-hardened steel, which offers high-impact resistance. High-carbon edges have good surface hardness and perform well in high-abrasion, low-impact applications such as finish work. High-carbon edges will not withstand the impact level of a through-hardened edge.
AVAILABLE OPTIONS:
Cat Tungsten Carbide Cutting Edges combine through-hardened steel with the wear resistance of tungsten carbide. When used in high-abrasion, low-impact applications, they can provide up to 20 times the life of a standard through-hardened edge. Fewer edge changes means less downtime and lower hardware costs.
AVAILABLE OPTIONS:
Cat carbide insert edges offer long wear life in higher speed applications like state/county road snow removal. The tungsten carbide is brazed into a milled groove in the center of the edge. The design offers impact resistance and minimizes edge “crowning” in applications that require a level grading operation.
SMOOTH OUT THE TOUGHEST ROADWAYS IN A SINGLE PASS.
The Cat GraderBit edge system outperforms steel blades in high-production road reconditioning applications. Individual cutting bits are faced with tungsten carbide to form a serrated edge to penetrate and lift material to the surface immediately. As a result, most road maintenance jobs can be accomplished in a single pass.
Cuts through tough and compact materials, causing lower ripping resistance and less horsepower loss.
Create edge patterns that deliver optimum performance.
Up to 10 times more wear life than a 254 mm edge.
GraderBit adapter board options are 914mm and 1219mm sections. Two holespacing patterns are available to control aggregate flow. Standard boards are used for most roadways, and the mining board hold pattern is 50% wider to accommodate large aggregate in mine environments.
AVAILABLE BITS:
The Mining Bit System works like the GraderBit system, but is upgraded to withstand the extreme applications faced by large motor graders (16M and 24M).
Protects the face and bottom of the bit, eliminating vast angle restrictions.
Bit profile helps maintain proper grading angle.
The rotating bit system outperforms steel blades in high-production road reconditioning applications. Individual cutting bits have tungsten carbide tips and form a serrated edge to penetrate and lift material to the surface immediately. As a result, most road maintenance jobs can be accomplished in a single pass.
Material is brought to the surface for reuse, reducing the expense of spreading new gravel.
No cast angle restriction.
Bits changed individually with no special tools.
Rotating Scarifier Bits are self-sharpening for more uniform wear and long life. Cutting height is maintained as cutting tools may be rotated from position to position. Carbide bits can last as long as 5 -10 sets of conventional grader blades.
Rotating Scarifier Bits are made for applications such as dirt and gravel reclamation, oil road reclamation, and snow and ice removal.
OPERATING TECHNIQUES FOR REDUCED COST.
Through better management of the interface between machine and materials, operators can maximize productivity, lower machine operating costs and reduce cab vibration, improving operator comfort.
PUT AN END TO MOLDBOARD WEAR.
Made of through-hardened DH-2 steel for added strength and service life, Cat end bits protect moldboard edges from wear.
Maximize moldboard life and lower repair costs. Use Cat end bits, overlays, repair plates and hardware to protect and repair your moldboards and working edges:
GET MORE OUT OF YOUR GRADER.
Scarifier and ripper systems on motor graders can be used to improve road surfaces by lifting material from compacted and worn areas or by removing the “crowning” that causes excessive wear on cutting edges.
Loosen material to reduce grading time and fill voids while saving on edge wear.
Reduce need for dozer ripping or cutting bit systems.
Teknoxgroup is the exclusive dealer of Caterpillar, the world's leading manufacturer of construction and mining equipment, marine and industrial engines.
Working hours: 08:00 - 16:00 (Mon-Fri)
